1 9

MA03 USB 3.2 Gen 1/USB 3.0 Front Panel Header 19-Pin to Type-E L-Shape Adapter

MA03 USB 3.2 Gen 1/USB 3.0 Front Panel Header 19-Pin to Type-E L-Shape Adapter

  • Enables “Dead” Front Panel Ports: The primary benefit is functionality. Many modern cases come with a front USB-C port, but many mid-range or older motherboards only have the older 19-pin USB 3.0 headers. This adapter bridges that gap, allowing you to actually use the front-panel USB-C port rather than leaving it as a "dead" or non-functional connector.
  • Resolves Clearance Issues: The EZDIY-FAB 19-Pin to Type-E L-Shape Adapter resolves critical clearance issues by redirecting stiff cables sideways, preventing long GPUs from crushing the connector and fitting perfectly in tight SFF builds. Its low-profile, 90-degree design eliminates aggressive cable bends and mechanical strain, protecting fragile motherboard pins while ensuring a clean, professional look.
  • Professional Cable Management: Instead of having a thick, looped cable jutting out from the center of your motherboard, the 90-degree adapter allows the cable to run parallel to the motherboard. You can immediately route the cable through a nearby grommet, hiding the bulk of the wire behind the motherboard tray for a "stealth" look.
  • Various Building Scenarios: Engineered for maximum versatility, this adapter fits a wide range of motherboard layouts, whether your 19-pin header is on the right side, the bottom, or the edge. The STD version is optimized for designs where the notch faces the interior, providing a sleek 90-degree cable path for cleaner routing. However, please ensure your case layout provides sufficient clearance near PSU shrouds, fans, or grommets to accommodate the angled connector.
  • Protects Motherboard Headers: The 19-pin USB 3.0 header is one of the most fragile connectors on a motherboard; the pins are thin and the plastic housing is often easily ripped off. By using a fixed 90-degree adapter, you reduce the leverage and tension placed on the header by the heavy, stiff front-panel cable, lowering the risk of bending pins or damaging the board during installation.
  • Plug-and-Play Simplicity: No Drivers: Since it is a physical pin-remapping tool, it requires zero software setup. Stable Connection: High-quality adapters (like those from EZDIY-FAB) use multi-layer PCBs to ensure signal integrity, meaning your front USB-C port remains stable for data transfers
  • STD/RVS Model & Color Options: Available in STD and RVS versions. Check the header notch orientation before purchase. Offered in Black and White with a clean, geometric design for a subtle premium look.
¥2,300 JPY
¥2,300 JPY
Sale Sold out
Shipping calculated at checkout.
COLOR
View full details