Long-reach PCIe 5.0 riser cable for upright and remote GPU layouts. The 600 mm length is designed for builds that need substantially more routing distance than a standard vertical-mount riser.
Key Specifications
Interface: PCIe 5.0 x16
Length: 600 mm
GPU-side connector: Right-angle
Colors: Black / White
Backward compatibility: PCIe 4.0 / 3.0 devices, depending on system configuration
Before You Buy
Confirm that 600 mm is the correct routing length for your case. Excess cable should not be sharply folded or compressed.
Check that the right-angle connector direction suits your GPU mounting position.
For best stability, make sure the riser is fully seated in both the motherboard PCIe x16 slot and the GPU connector.
Keep the cable away from sharp metal edges and avoid sustained side pressure on either connector.
Recommended For
Upright GPU layouts, large showcase cases and custom builds where the GPU is positioned farther from the motherboard than in a conventional vertical-mount setup.
Troubleshooting
If the system does not detect the GPU after installation, power off the PC and reseat both ends of the riser first. Also confirm that the motherboard BIOS is up to date and that the PCIe link-speed setting is compatible with your GPU, motherboard and riser configuration.
Need Compatibility Help?
Send us your motherboard + GPU + PC case model and intended mounting position before ordering. We can help check whether the 600 mm right-angle version is appropriate.
PCIe 5.0 x16 High-Speed Support
Supports PCIe 5.0 x16 bandwidth for next-generation GPU installation.
Flexible Flat Ribbon Design
Flexible flat cable design allows easier routing in vertical and upright GPU layouts.
Designed for Upright GPU Mounting
Optimized for upright GPU mount setups, helping achieve a cleaner showcase build.
Clean Internal Cable Management
Low-profile ribbon structure helps reduce cable clutter inside the case.
Backward Compatible
Backward compatible with PCIe 4.0 / 3.0 devices, depending on system setup.
