Designed for cleaner GPU power routing with less cable bend near the graphics-card power connector. This 180° reverse-orientation adapter redirects the 12V-2x6 / 12VHPWR connection behind the GPU for a cleaner build and easier side-panel clearance.
Before You Buy
Orientation: This is the RVS (Reverse) version. STD and RVS are not interchangeable. Check the direction of the GPU power socket before ordering.
Connector: 12V-2x6 / 12VHPWR GPU power connection.
Angle: 180° U-turn routing.
Available colors: Black, White, Red and Purple.
Compatibility Guidance
Compatibility depends on the position and orientation of the GPU power socket, GPU backplate/shroud clearance, and case side-panel clearance. If you are unsure whether to choose STD or RVS, send us your exact GPU model before ordering and we can help confirm the orientation.
Important RTX 5090 notice: This SHIELD angle adapter model is not intended for RTX 5090. For RTX 5090 builds, choose only EZDIY-FAB products explicitly labeled RTX 5090 Compatible.
Installation Checklist
Turn off the PC and disconnect AC power before installation.
Confirm the adapter orientation matches the GPU socket before inserting.
Insert the connector fully and evenly. Do not force the adapter if alignment is incorrect.
Make sure the adapter and cable are not under sideways pressure from the case panel.
After installation, visually confirm the connector remains fully seated.
Need Help Choosing?
Send us your GPU brand + exact model and a photo of the power-connector side. We can help determine whether STD or RVS is the correct version.
Before ordering, send us your GPU model, case model, motherboard, and connector orientation. We’ll help you check the fit.
RTX 5090: Current SHIELD angle adapter models are not intended for RTX 5090. For RTX 5090 builds, use only EZDIY-FAB products explicitly labeled RTX 5090 Compatible.
